THUNDER® WASH 100 W 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W White
The Thunder Wash 100 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 W comes with 3-pin XLR sockets for DMX input and output, 4 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Cold white
According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Music control
In music control mode, the device is controlled via the built-in microphone and can follow the rhythm of the music, for example.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
Strobe
Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
