F2 D PO Pole-operated Fresnel Spotlight with Daylight LED
Do you prefer your RDM-enabled spotlight to give off a soft-edged beam of light with a continuously adjustable angle of 15° to 40°? Looking for an energy-saving replacement for conventional 1 kW Fresnel models? If so, you should take a look at the Cameo F2 D PO: the professional Fresnel spotlight has a 200 mm quality lens and a high luminous flux of 15,000 lm. Its pole operability makes the Cameo F2 D PO the perfect choice for anyone who requires precise manual adjustment from the ground and is unable or unwilling to use a ladder. The 240-watt daylight LED has a colour temperature of 5,400 K and a service life of 50,000 hours. Its extremely high colour rendering index of 96 reproduces pure and natural colours.
The F2 D PO has 6 DMX control modes, a fast strobe function and four 16-bit dimmer curves with adjustable response. Six selectable pulse width modulation frequencies up to 25 kHz ensure flicker-free operation. High- efficiency heatpipe cooling and a temperature-controlled fan provide optimal operation. The robust, die-cast aluminium housing is equipped with a rotary encoder and OLED display for easy configuration of the spotlight. 5-pin DMX connectors and Power Twist mains sockets facilitate simple daisy-chaining. 8-way barn door, a gel frame and mains cable are included.
DMX512
Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
Environment-friendly
The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
LED technology
LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
Master & slave
Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
Standalone mode
In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
RDM
This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
This product is ETL certified.
Daylight colour temperature
The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
- Product type: LED Lighting System Accessories
- Type: Softbox
- Material: Weather-resistant plastic with metal struts
For a quote on this item, please contact our sales department or make an appointment with our sales representatives.
Exclusive distribution
Activate The Space LLC. ATS PRO
340A W Newberry Rd.
06002 Bloomfield
jb@ats-pro.com
https://www.ats-pro.com
+18007553532