Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results

ZENIT® W600 D SMD Outdoor SMD LED Wash Light and Strobe - Daylight Version

Item No.: CLZW600DSMD
Series: ZENIT® Series
Versions:
Featuring a total of 576 daylight SMD LEDs with up to zu 90,000 lm luminous flux for extreme brightness
48 individually controllable segments
Boost in blinder mode for temporarily increased output
IP65 rated for permanent outdoor use
High-resolution dimmer response thanks to 16-bit technology
5,700 K colour temperature and CRI
Integrated 2.4 GHz W-DMX™ transceiver
Control via W-DMX™, DMX and RDM (via DMX and W-DMX™)
Temperature-controlled fans for optimised low-noise operation
 

Contents and categories

Display all

Contents and categories

Series

Search suggestions

Display all results
Featuring a total of 576 daylight SMD LEDs with up to zu 90,000 lm luminous flux for extreme brightness
48 individually controllable segments
Boost in blinder mode for temporarily increased output
IP65 rated for permanent outdoor use
High-resolution dimmer response thanks to 16-bit technology
5,700 K colour temperature and CRI
Integrated 2.4 GHz W-DMX™ transceiver
Control via W-DMX™, DMX and RDM (via DMX and W-DMX™)
Temperature-controlled fans for optimised low-noise operation
Description
Designed for discerning lumen beings

With the ZENIT® W600 D SMD, you, as a lighting and event technician, can deliver an extremely bright, daylight-like floodlight with a high output of up to 90,000 lm. The ZENIT® fixture has been designed in accordance with protection class IP65 for demanding, permanent outdoor use at medium-sized and large professional events up to the lighting of television shows. The W600 SMD is equipped with 576 SMD

Wireless control and fine segment control

The ZENIT® W600 D SMD can be controlled via RDM and DMX. A 2.4 GHz W-DMX™ transceiver from Wireless Solution Sweden is also integrated to enable cable-free control as well as wireless master and slave operation. The daylight model W600 D SMD facilitates precise, independent control of a total of 48 segments via pixel control, even across multiple spotlights.

High-resolution dimmer response with 16-bit technology

Advanced 16-bit technology ensures a high-resolution dimmer response. You can choose between four dimmer curves, and you can also simulate the dimming characteristics of a classic halogen lamp. You also benefit from the wide beam angle of 104° to ensure intense and consistent floodlighting.

Sophisticated cooling concept

Three temperature-controlled fans provide reliable cooling in the cast aluminium housing. Depending on the sound sensitivity of the event, you can choose between three preconfigured modes, such as automated fan control or convection cooling for noiseless operation.

The ZENIT® W600 D SMD is your perfect tool for highly professional lighting, with features including output capability, stage-ready control and ease of use.?

Specifications
DMX512
Environment-friendly
Protection class IP65
LED technology
Master & slave
Standalone mode
Strobe
RDM

DMX512

Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).

Environment-friendly

The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.

Protection class IP65

The IP code of the protection class indicates how well the sensitive parts of the device are protected from foreign bodies and water entering. This device is fully protected from the penetration of dust and water jets.

LED technology

LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.

Master & slave

Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.

Standalone mode

In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.

Strobe

Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.

RDM

This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.

The W-DMX™ feature facilitates the wireless transmission of DMX control data.

SnapMag™ technology allows objects to be simply and quickly magnetically fixed to a device.

This product is ETL certified.

Daylight colour temperature

The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.

The calibration chip ensures that the mixed colours of the lamp are reproduced identically when using several fixtures, thereby preventing any deviations in colour between the lamps.

General
Product type
LED Outdoor Wash Light
Type
ZENIT
Colour spectrum
Daylight, White
Number of LEDs
576
LED type
Daylight SMD
Average LED lifetime
50000 hrs.
Refresh rate
Adjustable
Dispersion
104° (without SnapMag® filter frame)
Lens
PE and tempered glass
DMX input
5-pin IP65
DMX output
5-pin IP65
DMX mode
1-channel, 2-channel 1, 2-channel 2, 3-channel, 4-channel, 5-channel
DMX Functions
Dimmer, Dimmer Curve, Dimmer Fine, Dimmer Response, Strobe, Strobe Duration
Standalone modes
Master / Slave mode, Static
Controls
Enter, Mode, Value Down, Value Up
Indicators
OLED Display
Power supply
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
550 - 1050 W
Power supply connection
PowerCON TRUE1 compatible
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
IP65
Cooling
Temperature controlled fan (IP65)
Luminous flux
90000 lm
Operating Temperature
-15 - 45 °C
Accessories (included)
2 x omega mounting, Power cord
Width
463 mm
Length
291 mm
Height
161 mm
Weight
13 kg
Downloads & links
Name
Category
Type
File size
User's manual Manual pdf 5 MB
Technical data sheet Data Sheet pdf 922 KB
Technical Drawing Data Sheet dxf 3 MB
Technical Drawing Data Sheet pdf 230 KB
DMX Control Table Data Sheet pdf 68 KB
Photometric measurements Data Sheet pdf 521 KB
Fixture Library DASLIGHT Software zip 222 KB
Fixture Library GrandMA2 (06-2023) Software zip 24 KB
GDTF File (03-2023) Software zip 1 MB
Light distribution curves Software zip 5 KB
Tender documents Tender Specifications zip 131 KB
Cameo Product Catalogue 2024 Catalog pdf 12 MB
Product images Image files zip -
User's manual

Category: Manual

Type: pdf

File size: 5 MB

Technical data sheet

Category: Data Sheet

Type: pdf

File size: 922 KB

Technical Drawing

Category: Data Sheet

Type: dxf

File size: 3 MB

Technical Drawing

Category: Data Sheet

Type: pdf

File size: 230 KB

DMX Control Table

Category: Data Sheet

Type: pdf

File size: 68 KB

Photometric measurements

Category: Data Sheet

Type: pdf

File size: 521 KB

Fixture Library DASLIGHT

Category: Software

Type: zip

File size: 222 KB

Fixture Library GrandMA2 (06-2023)

Category: Software

Type: zip

File size: 24 KB

GDTF File (03-2023)

Category: Software

Type: zip

File size: 1 MB

Light distribution curves

Category: Software

Type: zip

File size: 5 KB

Tender documents

Category: Tender Specifications

Type: zip

File size: 131 KB

Cameo Product Catalogue 2024

Category: Catalog

Type: pdf

File size: 12 MB

Product images

Category: Image files

Type: zip

File size: -

Stories
12. Jan 2023
Cameo on ballet tour: Zaudio invests in Cameo ZENIT® W600 and W600 SMD
21. Jun 2022
Tante Mia Tanzt – With OTOS® H5. Electro Festival Uses Cameo Exclusively
24. May 2022
Cameo presents the ZENIT® W600 SMD: new IP65 LED outdoor wash lights available now
Related Products
Buy

For a quote on this item, please contact our sales department or make an appointment with our sales representatives.

Adam Hall North America Inc.
sales.us@adamhall.com
+1 973-335-7888